What is the use method of biomass boiler?

What is the use method of biomass boiler?

1. Preparation before operation of biomass boiler

(1) Check whether the power line is safe and reliable, and do not contact the heating part of the biomass boiler. If the wire is aging, it must be replaced in time before starting.

(2) When adding biomass fuel, it is strictly prohibited to mix stones, iron and other non-fuel substances.

(3) Check whether there is water shortage in the biomass boiler and heating system.

(4) Before starting the biomass boiler, ensure that all the doors inside and outside the furnace body are closed, and it is strictly prohibited to open them during operation.

2. Biomass boiler point start

Biomass boiler automatic ignition system

(1) First, ensure that the biomass boiler has been correctly installed, the boiler and pipeline have been filled with water, biomass pellet fuel into the box.

(2) Insert 220V/380V power supply, press Power on the controller, and then enter the setting screen.

(3) Click the biomass boiler controller run button "Run/Stop", then the boiler will automatically feed and fire, 5 minutes later the boiler blower and induced draft fan will automatically start and run, and the automatic ignition will be completed within 8 minutes, then the boiler will enter the automatic operation state according to the set data.