Ceramic Pellet Igniter For Wood Chip Pellet Burner

GRWAY® Ceramic Pellet Igniter for Wood Chip Pellet Burner produced by implementing ceramic lamination processes. Due to the compactness, high power and rapid heating speed. Ceramic igniter can provide higher reliability than ever before. Mainly applications include use as innovative types of heaters in the automotive, medical and semiconductor industries.

Model:G90105

Product Description

Ceramic Pellet Igniter for Wood Chip Pellet Burner

GRWAY® Ceramic Pellet Igniter for Wood Chip Pellet Burner produced by implementing ceramic lamination processes. Due to the compactness, high power and rapid heating speed. Ceramic igniter can provide higher reliability than ever before. Mainly applications include use as innovative types of heaters in the automotive, medical and semiconductor industries.

Parameter of GREENWAY Ceramic Pellet Igniter

Part Number: G90105
Application	Ceramic Pellet Igniter for Wood Chip Pellet Burner
Ceramic Holder	OD17.5mm/25mm or Accordingly
Working voltage	120V+/-10%
Working voltage	230V+/-10%
Main Material of Heating Element	White 95%alumina ceramic

Universal model of Ceramic Pellet Igniter for Wood Chip Pellet Burner

1. Heater Igniter: white alumina ceramic, and the content of alumina is no less than 95%.

2. Ni-wires: N6 Ni-wires with 0.8mm diameter.

4. 3 Brazing material: Ag72Cu28

3. Ceramic Holder: Alumina ceramic 95%,17.5mm

4. Heat shrinkable tube: black; heat resistance180°C

5. Cable: silicone cable, heat resistance 180°C

General Properties of Ceramic Pellet Igniter for Wood Chip Pellet Burner

Properties	Value	Condition
Forward Current	AC220V+/-10%	50/60Hz
Power Consumption	220V	114W~134W
	230V	120W~150W
	240V	131W~160W
Heating Resistance	Accordingly	23℃±2℃
Rising time	Within 30s to 800°C After 120 s to 940°C~	Applied at AC 220V and 23℃±2℃ambient temperature
Maximum Temperature	1050°C	Applied at AC 220V and 23℃±2℃ambient temperature
Ni-wire Pull Strength Test	No less than 3.0Kgf	Tester: Tensile tester. Angle:45°C